Fill Tables
The fill tables in this section provide a fast way to check
which fields in the output CPOs of
the Kepler actors provided by IMP12 are filled
and which should be filled.
The color coding is as follows:
The numbers in parentheses indicate the number of substructures. For the entire CPO, the number in parentheses signals the total number of fields that can be filled in the CPO.
The data structure is broken down in blocks for the substructures directly below the CPO level (level 1 structures). They are evenly distributed in two columns. No special meaning is attached to this distribution.
The list is constantly expanding and will regularly be updated. Currently, only fill tables for the most recent versions of the actors are specified.
The actors can be found in the KeplerActors project under Gforge.
IMP12's actors are hosted in the following categories:
last update: 2011-02-15 by konz
last update: 2011-02-15 by konz
last update: 2011-02-15 by konz
last update: 2011-02-15 by konz
fill table not yet available
last update: 2011-02-15 by konz
The color coding is as follows:
- gray - data structure or field not filled
- lightgreen - data structure partially filled
- purple - data structure or field filled
- red - data structure or field not filled but should be (partially) filled
The numbers in parentheses indicate the number of substructures. For the entire CPO, the number in parentheses signals the total number of fields that can be filled in the CPO.
The data structure is broken down in blocks for the substructures directly below the CPO level (level 1 structures). They are evenly distributed in two columns. No special meaning is attached to this distribution.
The list is constantly expanding and will regularly be updated. Currently, only fill tables for the most recent versions of the actors are specified.
The actors can be found in the KeplerActors project under Gforge.
IMP12's actors are hosted in the following categories:
- fixed_boundary_equilibrium - free_boundary_equilibrium - linear_MHD - NTM - numerical_tools - RWM - sawtooth
Free Boundary Equilibrium Reconstruction
High Resolution Fixed Boundary Equilibrium Reconstruction
At release status all high resolution fixed boundary equilibrium modules shall return an equilibrium CPO which fulfills the targeted fill status given below. Modules building on the equilibrium output from a fixed boundary equilibrium module may assume the existence of data in all filled fields. Caution need be applied though to ensure that the equilibrium geometric data are given in the desired coordinate system. Possibly, coordinate transformations need to be applied to the output CPO before feeding it to the next module.Targeted fill status: equilibrium CPO
| -> datainfo (7) | -> eqconstraint (14) |
| |--- dataprovider (0) | |--- bpol (8) |
| |--- putdate (0) | | |--- measured (0) |
| |--- source (0) | | |--- source (0) |
| |--- comment (0) | | |--- time (0) |
| |--- isref (0) | | |--- exact (0) |
| |--- whatref (5) | | |--- weight (0) |
| | |--- user (0) | | |--- sigma (0) |
| | |--- machine (0) | | |--- calculated (0) |
| | |--- shot (0) | | |--- chi2 (0) |
| | |--- run (0) | |--- bvac_r (8) |
| | |--- occurrence (0) | | |--- measured (0) |
| |--- putinfo (4) | | |--- source (0) |
| | |--- putmethod (0) | | |--- time (0) |
| | |--- putaccess (0) | | |--- exact (0) |
| | |--- putlocation (0) | | |--- weight (0) |
| | |--- rights (0) | | |--- sigma (0) |
| -> eqgeometry (14) | | |--- calculated (0) |
| |--- source (0) | | |--- chi2 (0) |
| |--- boundarytype (0) | |--- faraday (8) |
| |--- boundary (3) | | |--- measured (0) |
| | |--- r (0) | | |--- source (0) |
| | |--- z (0) | | |--- time (0) |
| | |--- npoints (0) | | |--- exact (0) |
| |--- geom_axis (2) | | |--- weight (0) |
| | |--- r (0) | | |--- sigma (0) |
| | |--- z (0) | | |--- calculated (0) |
| |--- a_minor (0) | | |--- chi2 (0) |
| |--- elongation (0) | |--- flux (8) |
| |--- tria_upper (0) | | |--- measured (0) |
| |--- tria_lower (0) | | |--- source (0) |
| |--- xpts (2) | | |--- time (0) |
| | |--- r (0) | | |--- exact (0) |
| | |--- z (0) | | |--- weight (0) |
| |--- left_low_st (2) | | |--- sigma (0) |
| | |--- r (0) | | |--- calculated (0) |
| | |--- z (0) | | |--- chi2 (0) |
| |--- right_low_st (2) | |--- i_plasma (8) |
| | |--- r (0) | | |--- measured (0) |
| | |--- z (0) | | |--- source (0) |
| |--- left_up_st (2) | | |--- time (0) |
| | |--- r (0) | | |--- exact (0) |
| | |--- z (0) | | |--- weight (0) |
| |--- right_up_st (2) | | |--- sigma (0) |
| | |--- r (0) | | |--- calculated (0) |
| | |--- z (0) | | |--- chi2 (0) |
| |--- active_limit (2) | |--- isoflux (6) |
| | |--- r (0) | | |--- position (2) |
| | |--- z (0) | | | |--- r (0) |
| -> flush (4) | | | |--- z (0) |
| |--- datainfo (7) | | |--- source (0) |
| | |--- dataprovider (0) | | |--- weight (0) |
| | |--- putdate (0) | | |--- sigma (0) |
| | |--- source (0) | | |--- calculated (0) |
| | |--- comment (0) | | |--- chi2 (0) |
| | |--- isref (0) | |--- jsurf (8) |
| | |--- whatref (5) | | |--- measured (0) |
| | | |--- user (0) | | |--- source (0) |
| | | |--- machine (0) | | |--- time (0) |
| | | |--- shot (0) | | |--- exact (0) |
| | | |--- run (0) | | |--- weight (0) |
| | | |--- occurrence (0) | | |--- sigma (0) |
| | |--- putinfo (4) | | |--- calculated (0) |
| | | |--- putmethod (0) | | |--- chi2 (0) |
| | | |--- putaccess (0) | |--- magnet_iron (2) |
| | | |--- putlocation (0) | | |--- mr (8) |
| | | |--- rights (0) | | | |--- measured (0) |
| |--- position (2) | | | |--- source (0) |
| | |--- r (0) | | | |--- time (0) |
| | |--- z (0) | | | |--- exact (0) |
| |--- coef (0) | | | |--- weight (0) |
| |--- codeparam (5) | | | |--- sigma (0) |
| | |--- codename (0) | | | |--- calculated (0) |
| | |--- codeversion (0) | | | |--- chi2 (0) |
| | |--- parameters (0) | | |--- mz (8) |
| | |--- output_diag (0) | | | |--- measured (0) |
| | |--- output_flag (0) | | | |--- source (0) |
| -> global_param (14) | | | |--- time (0) |
| |--- beta_pol (0) | | | |--- exact (0) |
| |--- beta_tor (0) | | | |--- weight (0) |
| |--- beta_normal (0) | | | |--- sigma (0) |
| |--- i_plasma (0) | | | |--- calculated (0) |
| |--- li (0) | | | |--- chi2 (0) |
| |--- volume (0) | |--- mse (8) |
| |--- area (0) | | |--- measured (0) |
| |--- psi_ax (0) | | |--- source (0) |
| |--- psi_bound (0) | | |--- time (0) |
| |--- mag_axis (3) | | |--- exact (0) |
| | |--- position (2) | | |--- weight (0) |
| | | |--- r (0) | | |--- sigma (0) |
| | | |--- z (0) | | |--- calculated (0) |
| | |--- bphi (0) | | |--- chi2 (0) |
| | |--- q (0) | |--- ne (8) |
| |--- q_95 (0) | | |--- measured (0) |
| |--- q_min (0) | | |--- source (0) |
| |--- toroid_field (2) | | |--- time (0) |
| | |--- r0 (0) | | |--- exact (0) |
| | |--- b0 (0) | | |--- weight (0) |
| |--- w_mhd (0) | | |--- sigma (0) |
| -> profiles_1d (33) | | |--- calculated (0) |
| |--- psi (0) | | |--- chi2 (0) |
| |--- phi (0) | |--- pfcurrent (8) |
| |--- pressure (0) | | |--- measured (0) |
| |--- F_dia (0) | | |--- source (0) |
| |--- pprime (0) | | |--- time (0) |
| |--- ffprime (0) | | |--- exact (0) |
| |--- jphi (0) | | |--- weight (0) |
| |--- jparallel (0) | | |--- sigma (0) |
| |--- q (0) | | |--- calculated (0) |
| |--- r_inboard (0) | | |--- chi2 (0) |
| |--- r_outboard (0) | |--- pressure (8) |
| |--- rho_tor (0) | | |--- measured (0) |
| |--- rho_vol (0) | | |--- source (0) |
| |--- beta_pol (0) | | |--- time (0) |
| |--- li (0) | | |--- exact (0) |
| |--- elongation (0) | | |--- weight (0) |
| |--- tria_upper (0) | | |--- sigma (0) |
| |--- tria_lower (0) | | |--- calculated (0) |
| |--- volume (0) | | |--- chi2 (0) |
| |--- vprime (0) | |--- q (8) |
| |--- area (0) | | |--- qvalue (0) |
| |--- aprime (0) | | |--- position (2) |
| |--- surface (0) | | | |--- r (0) |
| |--- ftrap (0) | | | |--- z (0) |
| |--- gm1 (0) | | |--- source (0) |
| |--- gm2 (0) | | |--- exact (0) |
| |--- gm3 (0) | | |--- weight (0) |
| |--- gm4 (0) | | |--- sigma (0) |
| |--- gm5 (0) | | |--- calculated (0) |
| |--- gm6 (0) | | |--- chi2 (0) |
| |--- gm7 (0) | |--- xpts (6) |
| |--- gm8 (0) | | |--- position (2) |
| |--- gm9 (0) | | | |--- r (0) |
| -> profiles_2d (9) | | | |--- z (0) |
| |--- grid_type (0) | | |--- source (0) |
| |--- grid (3) | | |--- weight (0) |
| | |--- dim1 (0) | | |--- sigma (0) |
| | |--- dim2 (0) | | |--- calculated (0) |
| | |--- connect (0) | | |--- chi2 (0) |
| |--- psi_grid (0) | -> coord_sys (10) |
| |--- jphi_grid (0) | |--- grid_type (0) |
| |--- jpar_grid (0) | |--- grid (2) |
| |--- br (0) | | |--- dim1 (0) |
| |--- bz (0) | | |--- dim2 (0) |
| |--- bphi (0) | |--- jacobian (0) |
| |--- position (2) | |--- g_11 (0) |
| | |--- r (0) | |--- g_12 (0) |
| | |--- z (0) | |--- g_13 (0) |
| -> time (0) | |--- g_22 (0) |
| -> codeparam (5) | |--- g_23 (0) |
| |--- codename (0) | |--- g_33 (0) |
| |--- codeversion (0) | |--- position (2) |
| |--- parameters (0) | | |--- r (0) |
| |--- output_diag (0) | | |--- z (0) |
| |--- output_flag (0) |
last update: 2011-02-15 by konz
HELENA
| Type | Input CPOs | Output CPOs | Kepler parameters |
|---|---|---|---|
| single time slice | equilibrium | equilibrium | path |
Actual fill status: equilibrium CPO
| -> datainfo (7) | -> eqconstraint (14) |
| |--- dataprovider (0) | |--- bpol (8) |
| |--- putdate (0) | | |--- measured (0) |
| |--- source (0) | | |--- source (0) |
| |--- comment (0) | | |--- time (0) |
| |--- isref (0) | | |--- exact (0) |
| |--- whatref (5) | | |--- weight (0) |
| | |--- user (0) | | |--- sigma (0) |
| | |--- machine (0) | | |--- calculated (0) |
| | |--- shot (0) | | |--- chi2 (0) |
| | |--- run (0) | |--- bvac_r (8) |
| | |--- occurrence (0) | | |--- measured (0) |
| |--- putinfo (4) | | |--- source (0) |
| | |--- putmethod (0) | | |--- time (0) |
| | |--- putaccess (0) | | |--- exact (0) |
| | |--- putlocation (0) | | |--- weight (0) |
| | |--- rights (0) | | |--- sigma (0) |
| -> eqgeometry (14) | | |--- calculated (0) |
| |--- source (0) | | |--- chi2 (0) |
| |--- boundarytype (0) | |--- faraday (8) |
| |--- boundary (3) | | |--- measured (0) |
| | |--- r (0) | | |--- source (0) |
| | |--- z (0) | | |--- time (0) |
| | |--- npoints (0) | | |--- exact (0) |
| |--- geom_axis (2) | | |--- weight (0) |
| | |--- r (0) | | |--- sigma (0) |
| | |--- z (0) | | |--- calculated (0) |
| |--- a_minor (0) | | |--- chi2 (0) |
| |--- elongation (0) | |--- flux (8) |
| |--- tria_upper (0) | | |--- measured (0) |
| |--- tria_lower (0) | | |--- source (0) |
| |--- xpts (2) | | |--- time (0) |
| | |--- r (0) | | |--- exact (0) |
| | |--- z (0) | | |--- weight (0) |
| |--- left_low_st (2) | | |--- sigma (0) |
| | |--- r (0) | | |--- calculated (0) |
| | |--- z (0) | | |--- chi2 (0) |
| |--- right_low_st (2) | |--- i_plasma (8) |
| | |--- r (0) | | |--- measured (0) |
| | |--- z (0) | | |--- source (0) |
| |--- left_up_st (2) | | |--- time (0) |
| | |--- r (0) | | |--- exact (0) |
| | |--- z (0) | | |--- weight (0) |
| |--- right_up_st (2) | | |--- sigma (0) |
| | |--- r (0) | | |--- calculated (0) |
| | |--- z (0) | | |--- chi2 (0) |
| |--- active_limit (2) | |--- isoflux (6) |
| | |--- r (0) | | |--- position (2) |
| | |--- z (0) | | | |--- r (0) |
| -> flush (4) | | | |--- z (0) |
| |--- datainfo (7) | | |--- source (0) |
| | |--- dataprovider (0) | | |--- weight (0) |
| | |--- putdate (0) | | |--- sigma (0) |
| | |--- source (0) | | |--- calculated (0) |
| | |--- comment (0) | | |--- chi2 (0) |
| | |--- isref (0) | |--- jsurf (8) |
| | |--- whatref (5) | | |--- measured (0) |
| | | |--- user (0) | | |--- source (0) |
| | | |--- machine (0) | | |--- time (0) |
| | | |--- shot (0) | | |--- exact (0) |
| | | |--- run (0) | | |--- weight (0) |
| | | |--- occurrence (0) | | |--- sigma (0) |
| | |--- putinfo (4) | | |--- calculated (0) |
| | | |--- putmethod (0) | | |--- chi2 (0) |
| | | |--- putaccess (0) | |--- magnet_iron (2) |
| | | |--- putlocation (0) | | |--- mr (8) |
| | | |--- rights (0) | | | |--- measured (0) |
| |--- position (2) | | | |--- source (0) |
| | |--- r (0) | | | |--- time (0) |
| | |--- z (0) | | | |--- exact (0) |
| |--- coef (0) | | | |--- weight (0) |
| |--- codeparam (5) | | | |--- sigma (0) |
| | |--- codename (0) | | | |--- calculated (0) |
| | |--- codeversion (0) | | | |--- chi2 (0) |
| | |--- parameters (0) | | |--- mz (8) |
| | |--- output_diag (0) | | | |--- measured (0) |
| | |--- output_flag (0) | | | |--- source (0) |
| -> global_param (14) | | | |--- time (0) |
| |--- beta_pol (0) | | | |--- exact (0) |
| |--- beta_tor (0) | | | |--- weight (0) |
| |--- beta_normal (0) | | | |--- sigma (0) |
| |--- i_plasma (0) | | | |--- calculated (0) |
| |--- li (0) | | | |--- chi2 (0) |
| |--- volume (0) | |--- mse (8) |
| |--- area (0) | | |--- measured (0) |
| |--- psi_ax (0) | | |--- source (0) |
| |--- psi_bound (0) | | |--- time (0) |
| |--- mag_axis (3) | | |--- exact (0) |
| | |--- position (2) | | |--- weight (0) |
| | | |--- r (0) | | |--- sigma (0) |
| | | |--- z (0) | | |--- calculated (0) |
| | |--- bphi (0) | | |--- chi2 (0) |
| | |--- q (0) | |--- ne (8) |
| |--- q_95 (0) | | |--- measured (0) |
| |--- q_min (0) | | |--- source (0) |
| |--- toroid_field (2) | | |--- time (0) |
| | |--- r0 (0) | | |--- exact (0) |
| | |--- b0 (0) | | |--- weight (0) |
| |--- w_mhd (0) | | |--- sigma (0) |
| -> profiles_1d (33) | | |--- calculated (0) |
| |--- psi (0) | | |--- chi2 (0) |
| |--- phi (0) | |--- pfcurrent (8) |
| |--- pressure (0) | | |--- measured (0) |
| |--- F_dia (0) | | |--- source (0) |
| |--- pprime (0) | | |--- time (0) |
| |--- ffprime (0) | | |--- exact (0) |
| |--- jphi (0) | | |--- weight (0) |
| |--- jparallel (0) | | |--- sigma (0) |
| |--- q (0) | | |--- calculated (0) |
| |--- r_inboard (0) | | |--- chi2 (0) |
| |--- r_outboard (0) | |--- pressure (8) |
| |--- rho_tor (0) | | |--- measured (0) |
| |--- rho_vol (0) | | |--- source (0) |
| |--- beta_pol (0) | | |--- time (0) |
| |--- li (0) | | |--- exact (0) |
| |--- elongation (0) | | |--- weight (0) |
| |--- tria_upper (0) | | |--- sigma (0) |
| |--- tria_lower (0) | | |--- calculated (0) |
| |--- volume (0) | | |--- chi2 (0) |
| |--- vprime (0) | |--- q (8) |
| |--- area (0) | | |--- qvalue (0) |
| |--- aprime (0) | | |--- position (2) |
| |--- surface (0) | | | |--- r (0) |
| |--- ftrap (0) | | | |--- z (0) |
| |--- gm1 (0) | | |--- source (0) |
| |--- gm2 (0) | | |--- exact (0) |
| |--- gm3 (0) | | |--- weight (0) |
| |--- gm4 (0) | | |--- sigma (0) |
| |--- gm5 (0) | | |--- calculated (0) |
| |--- gm6 (0) | | |--- chi2 (0) |
| |--- gm7 (0) | |--- xpts (6) |
| |--- gm8 (0) | | |--- position (2) |
| |--- gm9 (0) | | | |--- r (0) |
| -> profiles_2d (9) | | | |--- z (0) |
| |--- grid_type (0) | | |--- source (0) |
| |--- grid (3) | | |--- weight (0) |
| | |--- dim1 (0) | | |--- sigma (0) |
| | |--- dim2 (0) | | |--- calculated (0) |
| | |--- connect (0) | | |--- chi2 (0) |
| |--- psi_grid (0) | -> coord_sys (10) |
| |--- jphi_grid (0) | |--- grid_type (0) |
| |--- jpar_grid (0) | |--- grid (2) |
| |--- br (0) | | |--- dim1 (0) |
| |--- bz (0) | | |--- dim2 (0) |
| |--- bphi (0) | |--- jacobian (0) |
| |--- position (2) | |--- g_11 (0) |
| | |--- r (0) | |--- g_12 (0) |
| | |--- z (0) | |--- g_13 (0) |
| -> time (0) | |--- g_22 (0) |
| -> codeparam (5) | |--- g_23 (0) |
| |--- codename (0) | |--- g_33 (0) |
| |--- codeversion (0) | |--- position (2) |
| |--- parameters (0) | | |--- r (0) |
| |--- output_diag (0) | | |--- z (0) |
| |--- output_flag (0) |
last update: 2011-02-15 by konz
Linear MHD Stability Analysis
At release status all linear MHD stability modules shall return an mhd CPO which fulfills the targeted fill status given below. Modules building on the mhd output from a linear MHD stability module may assume the existence of data in all filled fields.Targeted fill status: mhd CPO
| -> datainfo (7) | -> n (0) |
| |--- dataprovider (0) | -> m (0) |
| |--- putdate (0) | -> psi (0) |
| |--- source (0) | -> frequency (0) |
| |--- comment (0) | -> growthrate (0) |
| |--- isref (0) | -> disp_perp (0) |
| |--- whatref (5) | -> disp_par (0) |
| | |--- user (0) | -> tau_alfven (0) |
| | |--- machine (0) | -> tau_resistive (0) |
| | |--- shot (0) | -> time (0) |
| | |--- run (0) | -> codeparam (5) |
| | |--- occurrence (0) | |--- codename (0) |
| |--- putinfo (4) | |--- codeversion (0) |
| | |--- putmethod (0) | |--- parameters (0) |
| | |--- putaccess (0) | |--- output_diag (0) |
| | |--- putlocation (0) | |--- output_flag (0) |
| | |--- rights (0) |
last update: 2011-02-15 by konz
ILSA
| Type | Input CPOs | Output CPOs | Kepler parameters |
|---|---|---|---|
| single time slice | equilibrium | mhd | path |
Actual fill status: mhd CPO
| -> datainfo (7) | -> n (0) |
| |--- dataprovider (0) | -> m (0) |
| |--- putdate (0) | -> psi (0) |
| |--- source (0) | -> frequency (0) |
| |--- comment (0) | -> growthrate (0) |
| |--- isref (0) | -> disp_perp (0) |
| |--- whatref (5) | -> disp_par (0) |
| | |--- user (0) | -> tau_alfven (0) |
| | |--- machine (0) | -> tau_resistive (0) |
| | |--- shot (0) | -> time (0) |
| | |--- run (0) | -> codeparam (5) |
| | |--- occurrence (0) | |--- codename (0) |
| |--- putinfo (4) | |--- codeversion (0) |
| | |--- putmethod (0) | |--- parameters (0) |
| | |--- putaccess (0) | |--- output_diag (0) |
| | |--- putlocation (0) | |--- output_flag (0) |
| | |--- rights (0) |
last update: 2011-02-15 by konz
Numerical Tools
PROGEN
| Type | Input CPOs | Output CPOs | Kepler parameters |
|---|---|---|---|
| single time slice | equilibrium (empty) | equilibrium | active
path_tag path |
last update: 2011-02-15 by konz